Care and Maintenance for Prolux Upright Vacuums

May 28, 2019 - 0 comments

Care and Maintenance for Prolux Upright Vacuums 

Owning any vacuum requires maintenance. At GreatVacs we understand the importance of understanding how to properly maintain your vacuum. In this video, we go over some basic maintenance tips to keep your Prolux Upright vacuum in tip-top shape. This will work on any Prolux upright vacuum cleaner model.

Important Safety Tips

  • Always make sure your machine is unplugged and the power button is turned off, before servicing your vacuum.
  • Always make sure your hands are dry and free from moisture before servicing your machine.
  • Be sure to wear gloves when servicing your machine to prevent any cuts or scrapes.
  • If you are uncomfortable working on your vacuum, please don’t hesitate to contact us at service@greatvacs.com and we can help you through the process or you can send it into us to fix it for you. 

 

Instructions

 

Start by removing the front cover.

 

To remove the bag you will need to grab the cardboard piece with your hand and pull straight off. To replace the bag with a new one, just reverse the process! Grab the cardboard and push straight on.

 

To check the pre-motor HEPA filter you can just pull it straight out. When inserting a new filter, be sure to slide it straight on both tracks. It should slide in easily with no resistance.

 

To check and/or replace the post-motor filter you will need to lay your vacuum cleaner down. There is a sliding mechanism on the side that you need to slide “up” to unlock the cover. You will then be able to pull the cover up and off to access the filter.

 

To replace the cover after switching out the filter just insert the peg on one side into the slot, lower the cover into place, and slide the lock back down.

If you need to remove or clean your brush roll, we have made a video specifically for that that you can watch >>> here!

Interested in a Prolux upright vacuum cleaner? Follow the links below for the different models.

Prolux 6000 

Prolux 7000

Prolux 9000

Already have one of these amazing vacuums, but need supplies? We sell them!

10 Pack of Bags

New HEPA filter (for 7000/9000 models only)

2 Pack of Belts

Don't forget, GreatVacs is the only authorized dealer of Prolux products, so if you need any parts, supplies or have any questions, email as service@greatvacs.com or leave a comment! You can also head on over to our Youtube channel to see more educational videos on all Prolux products.

 

Leave a comment: