"Why did we write this article? At Greatvacs we are the largest rebuild warehouse in the US. We have serviced and rebuilt over 50,000 high-end vacuums. We get asked all of the time "How to perform basic vacuum maintenance on your Prolux Tritan canister vacuum" so we decided to make this video and article for you. Enjoy :)"
REPLACING TRITAN BAG
To replace the Prolux Tritan vacuum bag you’ll need to open the lid exposing the bag chamber.
Remove the bag holder from the bag chamber.
Slide the old Tritan bag outside and dispose of it.
Grab the new bag and slide it into the bag holder make sure the arrow faces toward the bag holder.
Insert the bag holder into its location.
Close the lid.
Let’s replace the filter starting with a pre-motor filter.
Open the lid to gain access to the bag chamber and remove the bag holder.
Lift up the pre-motor filters tab
Slide the new filers into their place don't forget the bag holder.
To replace the post-motor HEPA filter you’ll need to flip the vacuum around so you can see HEPA filters.
Remove the cover by pulling it off the vacuum.
Remove the old HEPA filter.
Put the new HEPA filter in.
Reinstall the filter cover.
If you want to learn more about our products please visit GreatVacs.com or send us an email at email@example.com and we will gladly assist you!