How to Replace the Rear Wheel on a Prolux Tritan Vacuum

Accidentally throw your vacuum down the stairs again? Did the rear wheel fall off in the process? Well you’re in luck because in this video we show you how to remove and replace the wheels on the Prolux Tritan Canister Vacuum!

Important Safety Tips

  • Always make sure your machine is unplugged and the power button is turned off, before servicing your vacuum.
  • Always make sure your hands are dry and free from moisture before servicing your machine.
  • Be sure to wear gloves when servicing your machine to prevent any cuts or scrapes.
  • If you are uncomfortable working on your vacuum, please don’t hesitate to contact us at service@greatvacs.com and we can help you through the process or you can send it into us to fix it for you. 

 

Tools

  • Flat head screwdriver

 

Instructions

 

The rear wheels of the Prolux Tritan vacuum are held on by three tabs. To get them off you can pull the wheel away from the body a little and stick the screwdriver between the wheel and the body. Then, using the screwdriver, you can pry the wheel off.

 

To put a new wheel on, get two of the tabs latched.

 

Then take your flat head screwdriver and push the last tab in.

 

Now you can just push the wheel the rest of the way on and you’re done!

 

Don't forget, GreatVacs is the only authorized dealer of Prolux products, so if you need any parts, supplies or have any questions, email as service@greatvacs.com or leave a comment! You can also head on over to our YouTube channel to see more educational videos on all Prolux products.

 

How to Replace the Rear Wheel on a Prolux Tritan Vacuum

How to Replace the Rear Wheel on a Prolux Tritan Vacuum

Accidentally throw your vacuum down the stairs again? Did the rear wheel fall off in the process? Well you’re in luck because in this...

Read more

How to Replace the Foot Pedal on a GV Power Head 

If your GV Power Head’s pedal has broken off for one reason or another, you’re probably not too happy about it. But good news! In this video we show you the easy way to remove and replace the pedal.

 

Important Safety Tips

  • Always make sure your machine is unplugged and the power button is turned off, before servicing your vacuum.
  • Always make sure your hands are dry and free from moisture before servicing your machine.
  • Be sure to wear gloves when servicing your machine to prevent any cuts or scrapes.
  • If you are uncomfortable working on your vacuum, please don’t hesitate to contact us at service@greatvacs.com and we can help you through the process or you can send it into us to fix it for you. 

 

Tools

  • Phillips head screwdriver
  • Needle nose pliers
  • Flat head screwdriver

 

Instructions

 

Start by flipping your power head over and removing the 11 screws so that you can separate the bottom plate from the top. Set the screws aside in a safe place.

 

Flip back over and remove the top cover.

 

Unplug the wire that goes to the top cover and set the cover aside.

 

There are 2 more screws holding the pivot in place. Remove those and set aside.

 

The pivot will need to be moved so that you can get to the pedal.

 

To get the foot pedal out, you'll need to remove a metal pin and a small metal spring. To remove this pin use your flat head screwdriver to push it partway out. Then you can remove the foot pedal with the pin and spring.

 

Use the needle nose pliers to pull the pin out of the pedal. Don’t lose the spring, because you will need it for the replacement.

 

To assemble the new foot pedal, insert the pin partway.

 

Take the spring and line the longer, straight end up in the back of the pedal.

 

Then push the spring down so the pin can go through the spring and out the other side.

 

Push the pin through just to the other side as shown above.

 

Insert the long end of the pin into the pin hole.

 

Pushing down on the foot pedal, take your flat head screwdriver and bend the angled end of the spring into the hole.

 

Now, push the pin in the rest of the way.

 

Once the foot pedal is in you can replace the pivot.

 

Reconnect the plug.

 

Replace the top cover, making sure not to pinch any wires.

 

Finally, flip the power head over and then replace the screws.

 

 

If you need any parts, supplies or have any questions, email us at service@greatvacs.com or leave a comment! You can also head on over to our YouTube channel to see more educational videos.

 

How to Replace the Foot Pedal on a GV Power Head

How to Replace the Foot Pedal on a GV Power Head 

If your GV Power Head’s pedal has broken off for one reason or another, you’re probably not too happy about it. But good news! In...

Read more

How to Attach A Tool Caddy to A Central Vacuum Wand 

When you purchase a new Central Vacuum Tool Kit, the number of tools and attachments can be overwhelming. In this video Kyle demonstrates how to attach and use the 3-Peg Tool Caddy.

 

 

Important Safety Tips

  • Always make sure your machine is unplugged and the power button is turned off, before servicing your vacuum.
  • Always make sure your hands are dry and free from moisture before servicing your machine.
  • Be sure to wear gloves when servicing your machine to prevent any cuts or scrapes.
  • If you are uncomfortable working on your machine, please don’t hesitate to contact us at service@greatvacs.com and we can help you through the process or you can send it into us to fix it for you. 

  

Instructions

 

This process work for either the GV or Prolux central hose kit. We will start the process by demonstrating it on the wand. You’ll notice two things: your wand has a button lock and none of your tools have a hole to accept this button lock. It’s okay, because the tools are friction fit and will still fit on the end of the wand. All you need to do is slide the tool on while pushing down the button lock.

 

The hose works the same way – just slide the tool on the end while pushing down the button lock and friction will keep it in place.

 

To attach the tool caddy to the extendable wand start by extended it out.

 

Take the tool caddy and firmly push it onto the wand. You’re done!

 

 

Check out our Central Vacuum Hose Kits:

Universal 30 ft Central Vacuum Hose Kit With Wessel Werk Power Nozzle

Premium Electric Prolux Universal Central Vacuum Hose Kit With Wessel Werk Power Nozzle

Premium Prolux Universal Central Vacuum Hose Kit With Turbo Nozzle

30' GV Universal Central Vacuum Hose With Tools

 

If you’re in the market for a new Central Vacuum, check out the Prolux CV12000!

 

If you need any parts, supplies or have any questions, email us at service@greatvacs.com or leave a comment! You can also head on over to our YouTube channel to see more educational videos on all of our products.

 

How to Attach A Tool Caddy to A Central Vacuum Wand

How to Attach A Tool Caddy to A Central Vacuum Wand 

When you purchase a new Central Vacuum Tool Kit, the number of tools and attachments can be overwhelming. In this video Kyle demonstrates how...

Read more

How to Clean the Filters on a Prolux CV12000 Central Vacuum 

If you own a Prolux CV12000 Central Vacuum, you may find after a while that the filters get full of dirt and dust. Today we show you how to remove, clean, and replace the inner cloth and HEPA filters to get your vacuum back to tip-top shape!

Important Safety Tips

  • Always make sure your machine is unplugged and the power button is turned off, before servicing your vacuum.
  • Always make sure your hands are dry and free from moisture before servicing your machine.
  • Be sure to wear gloves when servicing your machine to prevent any cuts or scrapes.
  • If you are uncomfortable working on your vacuum, please don’t hesitate to contact us at service@greatvacs.com and we can help you through the process or you can send it into us to fix it for you.  

Instructions

 

You will need to take off the top portion of your Prolux CV12000 vacuum. There are two clamps, one on each side, that needs unlatched. Watch your fingers to make sure they don’t get pinched or crushed!

 

Once it’s unclamped, take the top portion off. You won’t need the dust bin, so you can set it to the side.

 

Lay the vacuum down so you have access to the filters.

 

The first filter is a micron cloth filter. To remove it, just grab the tab and pull up and out.

 

The second filters is a HEPA filter. To remove it, just untwist the black part in the middle.

 

Then pull the filter out.

 

Now that the filters are removed you can clean them. To clean the micron cloth filter you can shake it out, use an air compressor, or use a vacuum to get the dirt out.

 The HEPA filter is the only filter on the Prolux CV12000 central vacuum that is washable. You can also use an air compressor or vacuum to get the dirt out.

Once they’re both clean you can reinstall them.

 

Start with the HEPA filter. Insert the filter and line it up with the screw going through the hole. Then take the black piece and twist it back on. It should be pretty tight.

 

The micron cloth filter can be a little tricky to put back in. The easiest way is to bend the metal band in half and line the curve up in the groove.

 

Then slowly release the band while guiding it into the groove. Take great care to keep your fingers away, since it will quickly and suddenly snap back into place!

 

Need to buy replacement filters or parts? Follow these links!

New Washable HEPA Filter

New Inner Cloth Bag

 

In the market for a new Central Vacuum? Check out the Prolux CV12000!

 

Don't forget, GreatVacs is the only authorized dealer of Prolux products, so if you need any parts, supplies or have any questions, email as service@greatvacs.com or leave a comment! You can also head on over to our YouTube channel to see more educational videos on all Prolux products.

 

How to Clean the Filters on a Prolux CV12000 Central Vacuum

How to Clean the Filters on a Prolux CV12000 Central Vacuum 

If you own a Prolux CV12000 Central Vacuum, you may find after a while that the filters get full of dirt and dust. Today...

Read more