Care and Maintenance for Prolux Upright Vacuums 

Owning any vacuum requires maintenance. At GreatVacs we understand the importance of understanding how to properly maintain your vacuum. In this video, we go over some basic maintenance tips to keep your Prolux Upright vacuum in tip-top shape. This will work on any Prolux upright vacuum cleaner model.

Important Safety Tips

  • Always make sure your machine is unplugged and the power button is turned off, before servicing your vacuum.
  • Always make sure your hands are dry and free from moisture before servicing your machine.
  • Be sure to wear gloves when servicing your machine to prevent any cuts or scrapes.
  • If you are uncomfortable working on your vacuum, please don’t hesitate to contact us at service@greatvacs.com and we can help you through the process or you can send it into us to fix it for you. 

 

Instructions

 

Start by removing the front cover.

 

To remove the bag you will need to grab the cardboard piece with your hand and pull straight off. To replace the bag with a new one, just reverse the process! Grab the cardboard and push straight on.

 

To check the pre-motor HEPA filter you can just pull it straight out. When inserting a new filter, be sure to slide it straight on both tracks. It should slide in easily with no resistance.

 

To check and/or replace the post-motor filter you will need to lay your vacuum cleaner down. There is a sliding mechanism on the side that you need to slide “up” to unlock the cover. You will then be able to pull the cover up and off to access the filter.

 

To replace the cover after switching out the filter just insert the peg on one side into the slot, lower the cover into place, and slide the lock back down.

If you need to remove or clean your brush roll, we have made a video specifically for that that you can watch >>> here!

Interested in a Prolux upright vacuum cleaner? Follow the links below for the different models.

Prolux 6000 

Prolux 7000

Prolux 9000

Already have one of these amazing vacuums, but need supplies? We sell them!

10 Pack of Bags

New HEPA filter (for 7000/9000 models only)

2 Pack of Belts

Don't forget, GreatVacs is the only authorized dealer of Prolux products, so if you need any parts, supplies or have any questions, email as service@greatvacs.com or leave a comment! You can also head on over to our Youtube channel to see more educational videos on all Prolux products.

 

Care and Maintenance for Prolux Upright Vacuums

Care and Maintenance for Prolux Upright Vacuums 

Owning any vacuum requires maintenance. At GreatVacs we understand the importance of understanding how to properly maintain your vacuum. In this video, we go over some basic maintenance...

Read more

Unboxing and Assembling the Prolux Core Floor Cleaner

Here’s something new! The Prolux Core Heavy Duty Commercial floor cleaner. From polishing to scouring to scrubbing, and everything in between. This buffer does it all! Watch Kyle unbox and assemble the Core and show us how we’re supposed to use it.

Important Safety Tips

  • Always make sure your machine is unplugged and the power button is turned off, before servicing your vacuum.
  • Always make sure your hands are dry and free from moisture before servicing your machine.
  • Be sure to wear gloves when servicing your machine to prevent any cuts or scrapes.
  • If you are uncomfortable working on your vacuum, please don’t hesitate to contact us at service@greatvacs.com and we can help you through the process or you can send it into us to fix it for you. 

Supplies

  • Box cutter or knife

 

After opening the box you’ll find four pieces inside: the instruction manual, a blue and white tile/hard floor scrubber brush, a fifty-foot blue extension cord, and the Prolux Core itself.

 

Once removed from the box, the Prolux Core can be assembled with only one easy step! Simply slide the top part of the handle onto the bottom. Make sure the Prolux logo is oriented toward the front.

 

 

You can use the telescoping wand to adjust the height of the handle so that it is comfortable.

 

Use the foot pedal to unlock the tilt mechanism.

 

The extension cord holder will help keep a secure connection.

 

The Prolux Core has a single button for operation.

 

There are a wide variety of optional pads and brushes for all different uses! The light duty brush does well on carpet as well as many other surfaces.

 

Switching out pads and brushes is incredibly easy! Just pull the current one off the bottom and put the Prolux Core down on top of the new one, firmly pressing down. Its weight is enough to attach the pad for you!

 

If your tile floors are looking dull the Core has you covered! You can use polish cream and a microfiber pad to get them looking new again.

 

All of the pads and brushes are safe for wood floors as well.

 

Stiffer brushes are available for very hard surfaces – like concrete.

 

Coarse pads are even available to use for sanding.

 

Yes - even for sanding wood floors! The Prolux Core can really do it all!

If you already have one of these sweet floor cleaners, check these links for even more fun accessories!

Heavy Duty Brush

Light Duty Brush

Medium Duty Brush

Complete Set of Brushes

Complete Set of Pads

Mopping Pads & Pad Holder

Mopping Pads

If you have any questions or thoughts feel free to leave us a comment! You can also head on over to our Youtube channel to see more educational videos.

 

Unboxing and Assembling the Prolux Core Floor Cleaner

Unboxing and Assembling the Prolux Core Floor Cleaner

Here’s something new! The Prolux Core Heavy Duty Commercial floor cleaner. From polishing to scouring to scrubbing, and everything in between. This buffer does it all! Watch...

Read more

How to Replace the Hose on a Prolux Upright Vacuum

If you ever need to remove or replace the hose on your Prolux Upright vacuum, whether it be to remove a clog, or to replace a broken or torn hose, this video will take you through the steps to do so.

 

Important Safety Tips

  • Always make sure your machine is unplugged and the power button is turned off, before servicing your vacuum.
  • Always make sure your hands are dry and free from moisture before servicing your machine.
  • Be sure to wear gloves when servicing your machine to prevent any cuts or scrapes.
  • If you are uncomfortable working on your vacuum, please don’t hesitate to contact us at service@greatvacs.com and we can help you through the process or you can send it into us to fix it for you. 

 

Tools

  • Flat head screwdriver

 

Instructions

 

The easiest way to remove the hose from your Prolux upright vacuum is to insert a flat head screwdriver between the back of the vacuum and the hose and pry them apart. The hose should come out fairly easily.

Some models have two screws behind the main cover that will need to be removed first. In that case, once you remove the screws the hose should just pop out.

 

Interested in a Prolux upright vacuum cleaner? Follow the links below for the different models.

Prolux 6000

Prolux 7000

Prolux 9000

 

Already have one of these amazing vacuums, but need supplies? We sell them!

10 Pack of Bags

New HEPA filter (for 7000/9000 models only)

2 Pack of Belts

 

Don't forget, GreatVacs is the only authorized dealer of Prolux products, so if you need any parts, supplies or have any questions, email as service@greatvacs.com or leave a comment! You can also head on over to our Youtube channel to see more educational videos on all Prolux products.

 

How to Replace the Hose on a Prolux Upright Vacuum

How to Replace the Hose on a Prolux Upright Vacuum

If you ever need to remove or replace the hose on your Prolux Upright vacuum, whether it be to remove a clog, or to replace...

Read more

Converting A Prolux Central Vacuum Hose

When you buy a Prolux Central Vacuum Hose or Hose Kit from GreatVacs, the hose comes standard with a U.S. 110 Volt 2-prong pigtail cord. Also included in the kit, however, is everything you need to convert your hose to a 2-prong direct connection that plugs into the wall with your hose.

We sell several styles of hoses that fit almost any central vacuum system. Most of our hoses come in 30’ or 35’ lengths and are either non-electric or 2 or 3 way switched. In this video, Kyle goes over some of the differences between the hoses, and you can choose the right one for you!

 

 

Important Safety Tips

  • Always make sure your machine is unplugged and the power button is turned off, before servicing your vacuum.
  • Always make sure your hands are dry and free from moisture before servicing your machine.
  • Be sure to wear gloves when servicing your machine to prevent any cuts or scrapes.
  • If you are uncomfortable working on your vacuum, please don’t hesitate to contact us at service@greatvacs.com and we can help you through the process or you can send it into us to fix it for you. 

 

Tools

  • Flat head screwdriver
  • Needle nose pliers
  • The provided conversion kit
  • The Prolux hose

 

Instructions

 

Start by opening the plastic bag and removing the contents. Inside you will find instructions, the direct connection plug, and a safety plug. If you have any questions, please refer to the instructions!

 

Next, remove the hose cover. Use the screwdriver to push in the tab and then you will be able to slide the cover off.

 

Now you will be able to see the pigtail connection plug and its safety plug. Go ahead and remove the safety plug.

 

Take your needle nose pliers and pull the wires out of the pigtail cord terminals. Set the pigtail cord to the side.

 

Now take your direct connection plug and its safety plug and we can get it installed. Take note that the plug will be facing in the direction of the inlet where the hose gets plugged in.

 

Plug the wires into the direct connection plug and set it into the groove.

 

Then grab the safety plug and put that in.

 

Once everything is in position you can slide the cover back on. You will hear the tab snap back into place.

 

Congratulations! You successfully converted a pigtail to a direct connect!

 

 

Need a Central Vacuum Hose? Check out these options!

Universal 30 ft Central Vacuum Hose Kit With Wessel Werk Power Nozzle

Premium Electric Prolux Universal Central Vacuum Hose Kit With Wessel Werk Power Nozzle

Premium Prolux Universal Central Vacuum Hose Kit With Turbo Nozzle

30' GV Universal Central Vacuum Hose With Tools

 

If you’re in the market for a new Central Vacuum, check out the Prolux CV12000!

 

Don't forget, GreatVacs is the only authorized dealer of Prolux products, so if you need any parts, supplies or have any questions, email as service@greatvacs.com or leave a comment! You can also head on over to our Youtube channel to see more educational videos on all Prolux products.

 

 

 

 

Converting A Prolux Central Vacuum Hose

Converting A Prolux Central Vacuum Hose

When you buy a Prolux Central Vacuum Hose or Hose Kit from GreatVacs, the hose comes standard with a U.S. 110 Volt 2-prong pigtail cord. Also included in the...

Read more