Assembling a Kirby Vacuum Cleaner From GreatVacs!

Aug 18, 2022

Assembling a Kirby Vacuum Cleaner From GreatVacs!

"Why did we write this article? At GreatVacs we are the largest rebuild warehouse in the US. We have serviced and rebuilt over 50,000 high-end vacuums. For today's video we will assemble a Kirby Vacuum Cleaner From GreatVacs!" so we decided to make this video and article for you. Enjoy :)"


Hey everyone it's kyle from GreatVacs and I’m gonna show you how easy it is to assemble a Kirby vacuum cleaner.

The only tools you need are either a standard Phillips head or screwdriver or a power version if you have it.

These are the three main components you’ll receive inside your box.

Remove the cord wrap and the screw.

Take the top handle and connect the two pieces so what you do is slide over the lower handle portion.

On the top handle, there is a quarter wrap screw to go into, and then tighten it down with a screwdriver or power tool.

Now that you have two handle pieces together you’re gonna take it and slide it into the locking pivot piece you know it's locking when you hear it click.

To disconnect the handle there is going to be a button on the back of the two pivots push it in and pull the handle out.

Take the cord and feed it through these cord guides and then wrap it around the top and bottom cord.

For the last step get your cloth bag and find the clip on top of the bag.

Insert into this clip portion right here it’ll lock letting the user know it’s installed correctly.

All right that's gonna be it. 

I hope you guys can get your Kirby vacuum fully assembled with no issue whatsoever let’s say you have an issue please email us.

If you want to learn more about our products please visit or send us an email at and we will gladly assist you!

Tags: Kirby, Kirby bag, Kirby blower, Kirby Hose, Kirby problem, Kirby Shampoo, Kirby Shampooer, Kirby vacuum, Kirby Vacuums
Andrew Sharp

Leave a comment: