How to Easily Replace Your Kirby Vacuum Belt

Are you having trouble replacing your Kirby Vacuum belt? Well, in this video we will show you everything you'll need to know to do this at home.

 

Important Safety Tips

  • Always make sure your machine is unplugged and the power button is turned off, before servicing your vacuum.
  • Always make sure your hands are dry and free from moisture before servicing your machine.
  • Be sure to wear gloves when servicing your machine to prevent any cuts or scrapes.
  • If you are uncomfortable working on your vacuum, please don’t hesitate to contact us at service@greatvacs.com and we can help you through the process or you can send it into us to fix it for you. 

 

Instructions

 

The first thing you want to do is lift up this lid.

 

If you look at the power head you will see a sticker. It has a green arrow labeled "belt on" and a red arrow labeled "belt off."

 

The round piece on the front is the belt lifter. If you look at the top you’ll see that it also has a green arrow.

 

Now lift the metal tab on the front of the belt lifter and it turns into a handle!

 

Now you can easily turn it to line up the red arrows.

 

Fold the tab back down and then turn the release lever. The power head will drop down.

 

Look inside the head and you’ll see that the belt is hooked around a hook. This is how the belt lifter removes the belt from the vacuum and allows you to remove the power head.

 

Turn the tabs on the power head to “unlock.”

 

 

Now you can remove the plate. This gives you full access to the brush roll and belt.

 

Grab the brush roll and belt and pull them out.

 

Slide the old belt off and then slide the new one on.

 

Pay close attention to the tabs on each side of the brush roll. They sides are numbered from 1 to 3 and one side is also larger than the other.

The numbers are fine adjustments for how high or low you want your brush roll to sit. If you have a really high pile carpet you’ll probably want them both on 1. If you have a lot of low pile carpet or hard floors you’ll probably want it on 3. Most of the time we have them on 2.

 

So set both of the tabs to the desired number. Slide the brush roll in. Remember that one side is larger than the other, so it only fits correctly one way!

 

To get the belt back on the hook, use your belt lifter and line up the green arrows.

 

Now grab your belt and hold it snug against the brush roll.

 

 

Turn the belt lifter towards red and you should be able to see and feel when it grabs the belt. Keep twisting until the red arrows are lined up.

 

Reinstall the plate on the bottom of the power head. The front slides into the slots on the power head and the two tabs go in the back.

 

Lock it in place.

 

To make the power head easier to get back on, raise the height of the vacuum all the way up with the height adjuster.

 

Hook the hooks on the back of the power head onto the bar on the vacuum.

 

Pivot it up and then lock it in place.

 

Turn the belt lifter to line up the green arrows.

 

Close the lid and you’re done!

 

 

Need some new belts? We sell them here!

 

What about a new brush roll? We got those, too!

G3 and G4 models

G5 to Avalir Models

 

 

Which model of Kirby vacuum is the best? Here’s what we think!

 

Looking for more info? Check out our Education Center!

 

Need your Kirby repaired? Send us an email at service@greatvacs.com

 

We sell Kirby vacuums! We buy Kirby vacuums! And we sell bags, belts, cords, or anything else you need!

 

Here at Great Vacs we’ve serviced and rebuilt nearly 100,000 Kirby vacuum cleaners, so if you have any questions or comments feel free to leave us a comment! You can also head on over to our YouTube channel to see more education videos.

 

 

How to Easily Replace Your Kirby Vacuum Belt

How to Easily Replace Your Kirby Vacuum Belt

Are you having trouble replacing your Kirby Vacuum belt? Well, in this video we will show you everything you'll need to know to do this at home.

...

Read more

5 Things You Never Knew a Kirby Vacuum Can Do

Can a Kirby blow air? Can it shampoo a carpet? Does it work on Hardwood floors? What about Pet Hair? All these questions and more are answered today as we learn 5 things Kirby vacuums can do that you may not be aware of.

 

Important Safety Tips

  • Always make sure your machine is unplugged and the power button is turned off, before servicing your vacuum.
  • Always make sure your hands are dry and free from moisture before servicing your machine.
  • Be sure to wear gloves when servicing your machine to prevent any cuts or scrapes.
  • If you are uncomfortable working on your vacuum, please don’t hesitate to contact us at service@greatvacs.com and we can help you through the process or you can send it into us to fix it for you. 

 

#1: Blower/ Inflator

 

The first thing Kirby vacuums do that many people aren’t aware of is blowing and inflating. Start by removing the bag.

 

Then attach the tool hose! You can use the various blowing or inflating accessories to dust or inflate.

 

#2: Hard Floor Polisher.

 

The second thing Kirby vacuum cleaners can do is polish or scrub your hard floor! They have a wide range of polishers and scrubbers.

 

#3: Shampooer

 

Kirby vacuums can also shampoo carpets, upholstery, and spots! They have many attachments that allow you to shampoo almost anything you can imagine.

 

#4: Pet Hair/ Stair Cleaning

 

You can use the Kirby zip brush to easily clean pet hair off of any surface or clean stairs without hauling a heavy vacuum up and down.

 

#5: Mattress Cleaning

 

Do you have allergies? Do you have allergens in your mattress? Kirby vacuum cleaners are one of the only ones on the market that come with a mattress attachment!  

 

Which model of Kirby vacuum is the best? Here’s what we think!

 

Looking for more info? Check out our Education Center!

 

Need your Kirby repaired? Send us an email at service@greatvacs.com

 

We sell Kirby vacuums! We buy Kirby vacuums! And we sell bags, belts, cords, or anything else you need!

 

Here at Great Vacs we’ve serviced and rebuilt nearly 100,000 Kirby vacuum cleaners, so if you have any questions or comments feel free to leave us a comment! You can also head on over to our YouTube channel to see more educational videos.

 

5 Things You Never Knew a Kirby Vacuum Can Do

5 Things You Never Knew a Kirby Vacuum Can Do

Can a Kirby blow air? Can it shampoo a carpet? Does it work on Hardwood floors? What about Pet Hair? All these questions and more...

Read more

Transforming Your Kirby Vacuum into a Blowing/Inflating Machine

Kirby vacuums are well known for their suction power and durability! But did you know, you can use that same power, but have your Kirby be a great blowing/inflating machine? In this short video we will show how easy it is to transform it.

 

Important Safety Tips

  • Always make sure your machine is unplugged and the power button is turned off, before servicing your vacuum.
  • Always make sure your hands are dry and free from moisture before servicing your machine.
  • Be sure to wear gloves when servicing your machine to prevent any cuts or scrapes.
  • If you are uncomfortable working on your vacuum, please don’t hesitate to contact us at service@greatvacs.com and we can help you through the process or you can send it into us to fix it for you. 

 

Instructions

 

The first thing you’ll want to do is twist the bag counterclockwise, which unlocks it from the vacuum.

 

Once that’s done you can disconnect the bag from the top of the vacuum and set it aside.

 

Now take you hose and if you look inside you’ll see three tabs.

 

Those tabs line up with the brass tabs on the vacuum.

 

Line the hose up, making sure that the two hooks are facing away from the vacuum cleaner, and set it on. You may want to twist it each direction to make sure it falls into place all the way.

 

Take the hose end and twist it clockwise to lock it in place.

 

You can also check the safety switch on the side of the vacuum. There’s a tab on the hose end that will engage the switch when it’s properly locked in.

 

You’re done! Now you can turn the Kirby vacuum on and use all of your blowing and inflating attachments!

 

 

Which model of Kirby vacuum is the best? Here’s what we think!

 

Looking for more info? Check out our Education Center!

 

Need your Kirby repaired? Send us an email at service@greatvacs.com

 

We sell Kirby vacuums! We buy Kirby vacuums! And we sell bags, belts, cords, or anything else you need!

 

Here at Great Vacs we’ve serviced and rebuilt nearly 100,000 Kirby vacuum cleaners, so if you have any questions or comments feel free to leave us a comment! You can also head on over to our YouTube channel to see more educational videos.

 

Transforming Your Kirby Vacuum into a Blowing/Inflating Machine

Transforming Your Kirby Vacuum into a Blowing/Inflating Machine

Kirby vacuums are well known for their suction power and durability! But did you know, you can use that same power, but have your Kirby be a...

Read more