How To Remove a Kirby Vacuum Head

 

People love their Kirby vacuums! However, after a while some people feel like it just isn’t picking up like it used to. The most common reason is that the head was not taken off properly! Why would you ever need to take the head off? Well, you might need to change the belt, you might need to attach the hose, or you might be shampooing your carpet. Whatever the reason, you’ll want to take it off correctly. In this video we show you how!

 

 

Important Safety Tips

  • Always make sure your machine is unplugged and the power button is turned off, before servicing your vacuum.
  • Always make sure your hands are dry and free from moisture before servicing your machine.
  • Be sure to wear gloves when servicing your machine to prevent any cuts or scrapes.
  • If you are uncomfortable working on your vacuum, please don’t hesitate to contact us at service@greatvacs.com and we can help you through the process or you can send it into us to fix it for you. 

 

Instructions

 

The first thing you’ll need to do is raise the head up to the highest setting.

 

Then lift the lid.

 

You’ll see two green arrows lined up on the front. Turn the belt lifter until the two red arrows are aligned. If you don’t do this, you will have problems later! Never take the head off if the red arrows are not aligned!

 

Now, release the head.

 

At this point you can do whatever it is you need to do. When you’re done, it’s time to put the head back on.

 

Start by making sure the red arrows are still lined up.

 

If you look at the back of the head you’ll see two hooks. These hooks go on the bar on the vacuum.

 

Hook the head on the bar and pivot it up.

 

Latch it in place.

 

Turn the belt lifter so the green arrows are aligned.

 

You’re done! You can get back to vacuuming!

 

If you notice a sudden drop in vacuum power, you might have forgotten to turn the belt lifter to red before removing the head. When you do this the belt falls off and is disengaged. If this happened, don’t worry! We will show you how to put the belt back on.

 

Begin by taking off the bottom plate. The belt will just be hanging.

 

Use one hand to hold the belt tight against the brush roll. With the other hand turn the belt lifter to red to grab it.

 

If you look inside you’ll see that the belt is now stretched and hooked inside. Go ahead and replace the bottom plate and it is ready to be put back on your vacuum! Once it's attached, spin the belt lifter to green. Crisis averted!

 

 

 

Which model of Kirby vacuum is the best? Here’s what we think!

 

Looking for more info? Check out our Education Center!

 

Need your Kirby repaired? Send us an email at service@greatvacs.com

 

We sell Kirby vacuums! We buy Kirby vacuums! And we sell bags, belts, cords, or anything else you need!

 

Here at Great Vacs we’ve serviced and rebuilt nearly 100,000 Kirby vacuum cleaners, so if you have any questions or comments feel free to leave us a comment! You can also head on over to our YouTube channel to see more education videos.

 

How To Remove a Kirby Vacuum Head

How To Remove a Kirby Vacuum Head

 

People love their Kirby vacuums! However, after a while some people feel like it just isn’t picking up like it used to. The most common reason is that...

Read more

Miscellaneous Kirby Vacuum Attachment Functions - Tips & Tricks

Kirby is a high-end vacuum clean, and as such it can actually do a lot more than most people know about! In this video we go over a few things that most people never figure out!

 

 

Important Safety Tips

  • Always make sure your machine is unplugged and the power button is turned off, before servicing your vacuum.
  • Always make sure your hands are dry and free from moisture before servicing your machine.
  • Be sure to wear gloves when servicing your machine to prevent any cuts or scrapes.
  • If you are uncomfortable working on your vacuum, please don’t hesitate to contact us at service@greatvacs.com and we can help you through the process or you can send it into us to fix it for you. 

 

Instructions

 

First, let’s see how you can use your Kirby to clean the tops of your ceiling fans! Start by putting both wands on.

 

Then add the curved wand.

 

Finish it off with the wall tool. The shape will allow to easily reach the top surface of the ceiling fan from the floor!

 

The next fun trick is vacuuming your mattress! Take note that the longer the hose the more power you lose. If you want to do some serious deep cleaning, you’ll need to put on the hand-held tool. Start by removing the handle. (There’s a release at the back of the vacuum.)

 

Snap on the “hand held tool.”

 

And then snap your Kirby bag in place.

 

Instead of having the hose on you’ll actually have the head on for maximum cleaning power. Simply turn it on and you can vacuum your mattress, stairs, or anything else that needs a really good, deep clean.

 

What if you have all hardwood floors at home? A lot of people prefer a canister vacuum over and upright. With the right selection of wands and attachments, you can turn your upright Kirby into a canister vacuum!

 

Did you know your Kirby vacuum can blow air? It can be used as a leaf blower, inflator, or for dusting things like a keyboard! The first thing you’ll do is remove the bag.

 

Now remove the hose.

 

Then take the hose and line up the arrow with the notch on the vacuum. Twist the hose and it should be securely attached where the bag used to be.

 

There is another attachment that you’ll need to place on the front where the hose was.

 

Another cool thing your Kirby can do on the blow setup is shampooing carpets! Just have it set up to blow and add on the shampooer attachment.

 

 

 

Which model of Kirby vacuum is the best? Here’s what we think!

 

Looking for more info? Check out our Education Center!

 

Need your Kirby repaired? Send us an email at service@greatvacs.com

 

We sell Kirby vacuums! We buy Kirby vacuums! And we sell bags, belts, cords, or anything else you need!

 

Here at Great Vacs we’ve serviced and rebuilt nearly 100,000 Kirby vacuum cleaners, so if you have any questions or comments feel free to leave us a comment! You can also head on over to our YouTube channel to see more education videos.

 

Miscellaneous Kirby Vacuum Attachment Functions - Tips & Tricks

Miscellaneous Kirby Vacuum Attachment Functions - Tips & Tricks

Kirby is a high-end vacuum clean, and as such it can actually do a lot more than most people know about! In this video we go...

Read more

How To Wash A Kirby Vacuum Cleaner Outer Cloth Bag

Do you know how to wash your Kirby vacuum cleaner outer cloth bag? It’s simple! In this video we show you how easy it is to get ready for your washing machine.

 

 

Important Safety Tips

  • Always make sure your machine is unplugged and the power button is turned off, before servicing your vacuum.
  • Always make sure your hands are dry and free from moisture before servicing your machine.
  • Be sure to wear gloves when servicing your machine to prevent any cuts or scrapes.
  • If you are uncomfortable working on your vacuum, please don’t hesitate to contact us at service@greatvacs.com and we can help you through the process or you can send it into us to fix it for you. 

 

Instructions

 

The first thing you’ll want to do is remove the outer cloth bag from the vacuum cleaner.

 

Then unzip it and remove and discard the inner paper bag.

 

Now detach the fill tube from the bag.

 

Turn the bag inside out and toss it in your washing machine. You're done!

 

 

Which model of Kirby vacuum is the best? Here’s what we think!

 

Looking for more info? Check out our Education Center!

 

Need your Kirby repaired? Send us an email at service@greatvacs.com

 

We sell Kirby vacuums! We buy Kirby vacuums! And we sell bags, belts, cords, or anything else you need!

 

Here at Great Vacs we’ve serviced and rebuilt nearly 100,000 Kirby vacuum cleaners, so if you have any questions or comments feel free to leave us a comment! You can also head on over to our YouTube channel to see more education videos.

 

How To Wash A Kirby Vacuum Cleaner Outer Cloth Bag

How To Wash A Kirby Vacuum Cleaner Outer Cloth Bag

Do you know how to wash your Kirby vacuum cleaner outer cloth bag? It’s simple! In this video we show you how easy it is...

Read more

You'll never guess what 5 things this vacuum can do!

 

Can a Rainbow Vacuum Cleaner blow air? Can it pickup wet and dry messes? Can it be used as a purifier? What about Pet Hair? All these questions and more are answered today as we learn 5 things Rainbow vacuums can do that you may not be aware of.

 

Important Safety Tips

  • Always make sure your machine is unplugged and the power button is turned off, before servicing your vacuum.
  • Always make sure your hands are dry and free from moisture before servicing your machine.
  • Be sure to wear gloves when servicing your machine to prevent any cuts or scrapes.
  • If you are uncomfortable working on your vacuum, please don’t hesitate to contact us at service@greatvacs.com and we can help you through the process or you can send it into us to fix it for you. 

 

#1 – Blower/ Inflator

 

Rainbow vacuums can be used to blow of inflate simply by attaching the hose to the exhaust side! This is great for cleaning keyboards or dusting furniture and delicate electronics.

 

You can also use to clean places like automotive interiors and your engine bay.

 

Your Rainbow vacuum can also be used to quickly inflate air mattresses, beachballs, and inner tubes.

 

#2 – Wet and Dry Pickup

 

Rainbows are great for picking up pretty much anything – like spilled milk or water.

 

#3 – Air Purifying Mode

 

Rainbow vacuums are also great at cleaning air. They have HEPA and water filtration and are one of the best air purifiers on the market.

 

#4 – Pet Hair and Stair Cleaning

 

These vacuums are also great for cleaning up pet hair because of their excellent filtration and huge array of attachments.

 

One of the attachments is the Rainbow Mini Head, which is great for cleaning stairs without having to carry a heavy vacuum up and down.

 

#5 – Shampooing

 

With a few additional steps you can transform your Rainbow vacuum into a shampooing machine.  You can clean anything from low pile carpet to high pile carpet, tile, and any other water-safe hard floor surface. You can also easily transition from multiple surfaces to the next without needing to switch attachments.

 

Need to clean upholstery or auto interiors? There’s a hand held shampooer that is perfect for that!

 

 

Want to know what Rainbow vacuum is best for you? Check out our Rainbow Vacuum guide!

 

Looking for more info? Check out our Education Center!

 

Need your Rainbow repaired? Send us an email at service@greatvacs.com

 

We sell Rainbow vacuums! We buy Rainbow vacuums! And we sell parts, tools, or anything else you need! If you need any parts, supplies or have any questions, email as service@greatvacs.com or leave a comment! You can also head on over to our YouTube channel to see more educational videos on all of our different products.

 

You'll never guess what 5 things this vacuum can do!

You'll never guess what 5 things this vacuum can do!

 

Can a Rainbow Vacuum Cleaner blow air? Can it pickup wet and dry messes? Can it be used as a purifier? What about Pet...

Read more