How to Use a Mini Turbo Attachment

Aug 10, 2022

How to Use a Mini Turbo Attachment

"Why did we write this article? At Greatvacs we are the largest rebuild warehouse in the US. We have serviced and rebuilt over 50,000 high end vacuums. We get asked all of the time "how to use a mini turbo attachment" so we decided to make this video and article for you. Enjoy :)"

How to Use a Mini Turbo Attachment

The Brush Roll attachment is pretty much an upholstery tool but its better because it has the brush at the end that can pick up dirt, debris and even hair better than the standard upholstery tool. This tool can be used on couches, chair, tables, drapes and even your pets.

When you decide to use the brush roll on your pets, make sure the rubber bristles are down that way the bristles can pick up any loose hair on your pet. 

The Brush Roll tool will fit any residential vacuum that uses 32mm attachments.

How To Disassemble The Rubber Brush Tool

1. Pop up the rubber bristle part

2. Locate the collar piece and unlock it by turning it towards you

3. Once the collar piece is off, open up the top part

4. Remove the Turbine, brush and belt and wash the parts to remove any dirt.

How To Assemble The Brush Roll

1. Grab the belt first, put it on the brush roll and place it where there is a geared spot for it. 
2. Once the belt is on take the brush roll in and attach the caps and at the other end.
3. Slide the brush roll into its position
4. Get the turbine and locate the gear part, put the belt over that and align the
turbine to its position. Try to spin the brush roll to make sure its working properly.
5. Take the bottom part of the attachment and re-attach. Once its on lock the collar piece.
6. Re-attached the rubber bristle parts by popping it back on.
Tags: attachment
Dustin Chaffin

Leave a comment: