How to Make Your Hose Fit Better on Prolux 2.0 Vacuums

If you’re having a hard time setting up your new Prolux 2.0, watch this video to see how to easily get your hose connected firmly to your vacuum and wand, so you’ll be ready to go in no time!

Important Safety Tips

  • Always make sure your machine is unplugged and the power button is turned off, before servicing your vacuum.
  • Always make sure your hands are dry and free from moisture before servicing your machine.
  • Be sure to wear gloves when servicing your machine to prevent any cuts or scrapes.
  • If you are uncomfortable working on your vacuum, please don’t hesitate to contact us at service@greatvacs.com and we can help you through the process or you can send it into us to fix it for you. 

 

Tools

  • Heat gun or hair dryer

 

Instructions

 

As you can probably tell, the elbow piece of the hose if very tight and difficult to get on the vacuum portion.

 

 

Take your heat gun or hair dryer and heat up the plastic elbow piece to where it’s more pliable.

 

Once it’s adequately heated, push the elbow piece onto the vacuum portion as far as it will go.

 

You will use this technique on the other end of the hose to make it fit better on the wand as well.

 

When you insert the wand end into the hose you will need to make sure the lip goes in as well.

 

 

Check out this video on how to set up your wands the right way.

 

What’s that? You don’t have the best bagless backpack vacuum in the world? You better get one! Check them out here!

 

Don't forget, GreatVacs is the only authorized dealer of Prolux products, so if you need any parts, supplies or have any questions, email as service@greatvacs.com or leave a comment! You can also head on over to our YouTube channel to see more educational videos on all Prolux products.

 

How to Make Your Hose Fit Better on Prolux 2.0 Vacuums

How to Make Your Hose Fit Better on Prolux 2.0 Vacuums

If you’re having a hard time setting up your new Prolux 2.0, watch this video to see how to easily get your hose connected...

Read more

How to Use the Prolux 2.0 Wands

If you’re having a hard time setting up your new Prolux 2.0, watch this video to see how to extend and properly set up your wand in no time!

 

Important Safety Tips

  • Always make sure your machine is unplugged and the power button is turned off, before servicing your vacuum.
  • Always make sure your hands are dry and free from moisture before servicing your machine.
  • Be sure to wear gloves when servicing your machine to prevent any cuts or scrapes.
  • If you are uncomfortable working on your vacuum, please don’t hesitate to contact us at service@greatvacs.com and we can help you through the process or you can send it into us to fix it for you. 

 

Instructions

 

The picture above shows the main wand that comes with the standard 2.0 kits.

 

The lower portion of the wand is contained inside the larger portion and sticks out as seen here.

 

The remove the lower portion you will need to unclamp the locking mechanism, grab the end, twist, and pull.

 

If you’re having trouble removing this section you may need to loosen the set screw, which is shown in the picture above.

 

 

What’s that? You don’t have the best bagless backpack vacuum in the world? You better get one! Check them out here!

 

Don't forget, GreatVacs is the only authorized dealer of Prolux products, so if you need any parts, supplies or have any questions, email as service@greatvacs.com or leave a comment! You can also head on over to our YouTube channel to see more educational videos on all Prolux products.

 

How to Use the Prolux 2.0 Wands

How to Use the Prolux 2.0 Wands

If you’re having a hard time setting up your new Prolux 2.0, watch this video to see how to extend and properly set up your wand in no...

Read more

How to Attach A Tool Caddy to A Central Vacuum Wand 

When you purchase a new Central Vacuum Tool Kit, the number of tools and attachments can be overwhelming. In this video Kyle demonstrates how to attach and use the 3-Peg Tool Caddy.

 

 

Important Safety Tips

  • Always make sure your machine is unplugged and the power button is turned off, before servicing your vacuum.
  • Always make sure your hands are dry and free from moisture before servicing your machine.
  • Be sure to wear gloves when servicing your machine to prevent any cuts or scrapes.
  • If you are uncomfortable working on your machine, please don’t hesitate to contact us at service@greatvacs.com and we can help you through the process or you can send it into us to fix it for you. 

  

Instructions

 

This process work for either the GV or Prolux central hose kit. We will start the process by demonstrating it on the wand. You’ll notice two things: your wand has a button lock and none of your tools have a hole to accept this button lock. It’s okay, because the tools are friction fit and will still fit on the end of the wand. All you need to do is slide the tool on while pushing down the button lock.

 

The hose works the same way – just slide the tool on the end while pushing down the button lock and friction will keep it in place.

 

To attach the tool caddy to the extendable wand start by extended it out.

 

Take the tool caddy and firmly push it onto the wand. You’re done!

 

 

Check out our Central Vacuum Hose Kits:

Universal 30 ft Central Vacuum Hose Kit With Wessel Werk Power Nozzle

Premium Electric Prolux Universal Central Vacuum Hose Kit With Wessel Werk Power Nozzle

Premium Prolux Universal Central Vacuum Hose Kit With Turbo Nozzle

30' GV Universal Central Vacuum Hose With Tools

 

If you’re in the market for a new Central Vacuum, check out the Prolux CV12000!

 

If you need any parts, supplies or have any questions, email us at service@greatvacs.com or leave a comment! You can also head on over to our YouTube channel to see more educational videos on all of our products.

 

How to Attach A Tool Caddy to A Central Vacuum Wand

How to Attach A Tool Caddy to A Central Vacuum Wand 

When you purchase a new Central Vacuum Tool Kit, the number of tools and attachments can be overwhelming. In this video Kyle demonstrates how...

Read more

Rainbow Vacuum Hose Falling Off?

One question that we get quite a bit is “Why does my hose keep coming off of my Rainbow E series vacuum cleaner?” To answer this, here’s a video with a few helpful tips and tricks on how to ensure that the hose is connected correctly and how to keep it connected correctly while you’re using your vacuum!


Important Safety Tips

  • Always make sure your machine is unplugged and the power button is turned off, before servicing your vacuum.
  • Always make sure your hands are dry and free from moisture before servicing your machine.
  • Be sure to wear gloves when servicing your machine to prevent any cuts or scrapes.
  • If you are uncomfortable working on your vacuum, please don’t hesitate to contact us at service@greatvacs.com and we can help you through the process or you can send it into us to fix it for you. 


Instructions

Remove the hose and take a look at the end that connects to the vacuum. You will see two metal prongs - if there is anything blocking the prongs, or if they’re bent, it will cause a bad connection and he vacuum light will probably turn on.

 

The two grey tabs you see on the hose actually secure it to the vacuum cleaner, so if either of the tabs are broken or damaged that could also cause a bad connection and cause the light to turn on as well.

 

When you plug in the hose, you’ll want to lift up the little flap and that opens the electrical port.

 

Insert the hose and firmly press it into place. You should see both grey tabs lock into place and you will probably hear it as well. You can try applying firm pressure to both sides alternately to make sure the latches engage.

 

Another thing to check are the two slots on the vacuum. If these are damaged or broken that could be part of the problem. If they are broken send us an email at service@greatvacs.com, including pictures if possible, and we can help you get it fixed!

Here at Great Vacs we’ve serviced and rebuilt many Rainbow vacuum cleaners, so if you have any questions or comments feel free to leave us a comment! You can also head on over to our Youtube channel to see more educational videos.

 

Rainbow Vacuum Hose Falling Off?

Rainbow Vacuum Hose Falling Off?

One question that we get quite a bit is “Why does my hose keep coming off of my Rainbow E series vacuum cleaner?” To answer this, here’s a video with...

Read more