How to Clean the Fan on New Comfort Air Purifiers

In this video, we go over cleaning the fan our New Comfort Air Purifiers. If your purifier is starting to get dusty or dirty, it’s time for a cleaning!

 

Important Safety Tips

  • Always make sure your machine is unplugged and the power button is turned off, before servicing your vacuum.
  • Always make sure your hands are dry and free from moisture before servicing your machine.
  • Be sure to wear gloves when servicing your machine to prevent any cuts or scrapes.
  • If you are uncomfortable working on your vacuum, please don’t hesitate to contact us at service@greatvacs.com and we can help you through the process or you can send it into us to fix it for you. 

  

Instructions

 

First, we’ll take a look at an ozone generator. To access the fan you’ll need to take off the top cover. There are screws on the sides and top handle portion. Once the screws are removed you can take the top handle off and then remove the top cover.

 

This is a great time to not only clean the fan, but to clean everything else on the inside. To clean the fan you can use an air compressor, canned air, rag or a duster brush.

 

Now we’ll show you how to access the fan on a 6 stage New Comfort air purifier. If you have a front grill, accessing the fan is going to be a breeze.

 

On some models there is a notch on the bottom of the grill where you can get your fingers under. Then you can just pop the grill off.

 

 

If you don’t have a notch you can use a flat head screwdriver to get between the case and the grill and pop it off that way.

 

Once it’s off you have access to the fan. You can use an air compressor, canned air, rag, or duster brush to clean it.

 

 

Check out our demos, scratch-and-dent, and open box model sales!

 

If you need any parts, supplies or have any questions, email us at service@greatvacs.com or leave a comment! You can also head on over to our YouTube channel to see more educational videos.

 

How to Clean the Fan on New Comfort Air Purifiers

How to Clean the Fan on New Comfort Air Purifiers

In this video, we go over cleaning the fan our New Comfort Air Purifiers. If your purifier is starting to get dusty or dirty, it’s...

Read more

How to Clean a Water Based Air Purifier

In this video, Kyle teaches us how to easily clean almost any water-based air purifier!

 

Important Safety Tips

  • Always make sure your machine is unplugged and the power button is turned off, before servicing your machine.
  • Always make sure your hands are dry and free from moisture before servicing your machine.
  • Be sure to wear gloves when servicing your machine to prevent any cuts or scrapes.
  • If you are uncomfortable working on your machine, please don’t hesitate to contact us at service@greatvacs.com and we can help you through the process or you can send it into us to fix it for you. 

 

Instructions

 

For our demonstration, we’ll be using a Prolux water-based air purifier.

 

As you can see, the bowl has a lot of hard water on the inside.

 

We’re going to submerge the bowl in a bucket of hot water. If you’re at home you can use a sink.

 

Once it is completely submerged you’re going to add a cup of distilled white vinegar and let it soak for 30 minutes.

 

After 30 minutes you can remove the bowl and wipe it down. You can rinse it with water if you’d like, but it’s not necessary. It should look pretty much brand new!

 

Here’s another trick to cleaning not only the bowl, but the underside of the motor. Fill the bowl to the fill line with a mix of warm water and vinegar. The put the top portion back on.

 

Then plug it in and let it run for about 12 hours. Then, just empty the water bowl and wipe everything down!

 

Check out our Prolux Water Based Air Purifiers:

Oil Diffusing Water Based Air Purifier/Humidifier by Prolux

Touch Screen Prolux Water Based Air Purifying Humidifier & Aromatherapy Diffuser

 

Check out our Ocean Blue Water Based Air Purifiers:

Oil Diffusing Water Based Air Purifier/Humidifier by Ocean Blue

Touch Screen Ocean Blue Water Based Air Purifying Humidifier and Aromatherapy Diffuser

 

We even have a mini desktop version!

Mini Oil Diffusing Desktop Water Based Air Purifier/Humidifier by New Comfort

 

If you need any parts, supplies or have any questions, email us at service@greatvacs.com or leave a comment! You can also head on over to our YouTube channel to see more educational videos.

 

How to Clean a Water Based Air Purifier

How to Clean a Water Based Air Purifier

In this video, Kyle teaches us how to easily clean almost any water-based air purifier!

 

Important...

Read more

How to Replace the UV Bulb on SS7000 New Comfort Air Purifiers

In this video, we go over replacing the UV bulb on the New Comfort SS7000 Air Purifier.

Important Safety Tips

  • Always make sure your machine is unplugged and the power button is turned off, before servicing your vacuum.
  • Always make sure your hands are dry and free from moisture before servicing your machine.
  • Be sure to wear gloves when servicing your machine to prevent any cuts or scrapes.
  • If you are uncomfortable working on your machine, please don’t hesitate to contact us at service@greatvacs.com and we can help you through the process or you can send it into us to fix it for you. 

 

Instructions

 

To access the UV bulb on the New Comfort SS7000 air purifier you will need to remove the cover. There are four screws on each side that you need to remove. Once they’re removed you can just pull the cover off.

 

The bulb is located in the middle. You can remove it like any other household lightbulb – just carefully unscrew it counter clockwise. Then take your new bulb in screw it in clockwise until it’s snug.

 

Finally replace the top cover and screws and you’re done!

 

Check out our New Comfort products here!

 

If you need any parts, supplies or have any questions, email us at service@greatvacs.com or leave a comment! You can also head on over to our YouTube channel to see more educational videos on all of our products.

 

How to Replace the UV Bulb on SS7000 New Comfort Air Purifiers

How to Replace the UV Bulb on SS7000 New Comfort Air Purifiers

In this video, we go over replacing the UV bulb on the New Comfort SS7000 Air Purifier.

Important Safety Tips

  • Always make sure your machine is unplugged and the power button is turned off, before servicing your vacuum.
  • Always make sure your hands are dry and free from moisture before servicing your machine.
  • Be sure to wear gloves when servicing your machine to prevent any cuts or scrapes.
  • If you are uncomfortable working on your machine, please don’t hesitate to contact us at service@greatvacs.com and we can help you through the process or you can send it into us to fix it for you. 

 

Tools

  • Flat head screwdriver

 

Instructions

 

All of our New Comfort air purifiers have a fuse block located on the back side, which will look something like the image above. Inside you will find the spare fuse along with the main fuse.

 

To access the fuses you will need a flat head screwdriver. Down by the three prongs there is a little button you’ll need to push.

 

Once you get the fuses out it will look something like the image above. The bottom one is your main fuse and the one in the hole is the spare.

 

Once they’re switched just slide them back in and you’re done!

 

 

Check out our New Comfort products here!

 

 

If you need any parts, supplies or have any questions, email us at service@greatvacs.com or leave a comment! You can also head on over to our YouTube channel to see more educational videos on all of our products.

 

How to Replace the Fuse on New Comfort Air Purifiers

How to Replace the Fuse on New Comfort Air Purifiers

In this video, we go over replacing the fuse on our New Comfort Air Purifiers. If your purifier isn’t turning on, this may be something...

Read more